D-TAIFUN OF
| Generel Data / model | 07/1585 | 8,5/1470 | 10/1325 |
| Thermal output 70/103 °C | 325 kW | 335 kW | 335 kW |
| Thermal output 30/60 °C | 56 kW | 53 kW | 48 kW |
| Recoverable thermal output ¹ | 381 kW | 388 kW | 383 kW |
| Fuel cosumption (Hu=10,0 kW/Nm³) | 43,4 Nm³/h | 44,2 Nm³/h | 43,6 Nm³/h |
| Power requirement (kW) | 5,6 kW | ||
| BUS-System | Modbus TCP | ||
| Remote maintenance TCP/IP | yes | ||
| Engine | |||
| Type | R6 | ||
| Engine displacement | 12,82 L | ||
| Engine Type | Naturally aspirated | ||
| Brennstoffeinsatz 2) | 449 kW | ||
| RPM | 1800 min-1 | ||
| ISO standard power (mech.) ² | 170 kW | ||
| Engine cooling water heat quantity | 145 kW | ||
| Exhaust gas heat capacity 110 °C | 98 kW | ||
| Efficieny Thermal ² | 54,1% | ||
| Efficieny Combined (el. + th.) ² | 92,0% | ||
| Engine oil | semi-synthetic | ||
| Lubrication oil consumption | 125 g/Bh | ||
| Filling capacity lubricant (max.) | 70 + 150 L | ||
| Compressor | |||
| Manufacturer | Atlas Copco | ||
| Heat recovery compressor | 132 kW | 135 kW | 133 kW |
| Outlet pressure, barg ³ | 7 | 8,5 | 10 |
| Free air delivery (FAD), m³/min ³ | 26,4 | 24,5 | 22 |
| Modulation / power control | 60% - 100% | ||
| Compressed air connection | DN 100 PN 16 | ||
| Gas supply | |||
| Gas train | Nach DIN | ||
| Interface Gas | DN 50 (2") | ||
| Gas flow pressure | 30 - 80 mbar | ||
| Air supply | |||
| Combustion air mass flow | 595 kg/h | ||
| Air temperature | 25°C | ||
| Exhaust | |||
| Interface Exhaust | DN 150 | ||
| TA-Luft | yes | ||
| Exhaust temperature | 620 °C | ||
| Condensate mass flow | 108 kg/h | ||
| Max. permissible back pressure | < 15 mbar | ||
| Flow rate, dry | 466 Nm³/h | ||
| Mass flow, wet | 576 kg/h | ||
| Hydraulic integration | 30/60 | 70/101 4) | |
| Interface inlet/outlet | DN 65 | DN 65 | |
| Norm in-/outlet temperatur | 30 / 60°C | 70 / 101°C 4) | |
| Standard flow rate | 3,3 m³/h | 10,2 m³/h | |
| Heating water pressure | 2,5 bar (ü) | 4 bar (ü) | |
| Dimensions / Weight | |||
| Dimensions (LxWxH) | 4550x1800x2200 mm | ||
| Weight Module (w/o operating fluids) | 4900 kg | ||
| Dimensions housing (LxWxH) | 4800x2000x2300 mm | ||
| Weight housing | 800 kg | ||
| Dimensions cabinet (LxWxH) | 1200x1200x400 mm | ||
| Weight cabinet | 130 kg | ||
| Recommended concrete strength | C20/25 | ||
| Payload, qk | 3,5 kN/m² | ||
| Noise emissions (incl. standard silencer) | |||
| Unit 1 m / 10 m | 75 / 65 dB(A) | ||
| Exhaust gas stack 10 m | 67 dB(A) | ||
| Exh. emissions with catalytic converter | |||
| NOX | < 250 mg/Nm³ | ||
| CO | < 250 mg/Nm³ | ||
| HCHO | < 5 mg/Nm³ | ||
| Protection class | |||
| Unit | IP 23 | ||
| Unit with housing | IP 53 | ||
| Control cabinet | IP 55 | ||
| Options | |||
| Housing | yes | ||
| Additional silencer | yes | ||
| Emergency cooler | yes | ||
| Gas warning system | yes | ||
| Knock control | yes | ||
| Gross calorific value | yes | ||
| Additional lubrication oil tank | yes | ||
| LTE / UMTS-modul | yes | ||
| BUS-converter | yes | ||
| Heat meter (calibrated) | yes | ||
| Neutralisation plant | yes | ||
| Compressed air flow meter | yes | ||
| Containerised solution | yes | ||
| Remote control | yes | ||
| Directly heated adsorption dryers | yes | ||
| Master Control readynes | yes | ||
| Contribution, installation, commisioning | yes |
¹ with a tolerance of ±7%; ² acc. to ISO 3046-1; ³ acc. to ISO 1217, Anh. D.
⁴ max. possible temperature up to 108 °C
