D-HURRIKAN
| Generel Data / model | 07/1320 | 08/1170 | 10/1070 | 13/850 |
|---|---|---|---|---|
| Recoverable thermal output ¹ | 214 - 356 kW | |||
| Fuel cosumption (Hu=10,0 kW/Nm³) | 31,6 Nm³/h | |||
| Power requirement (kW) | 3,5 kW | |||
| BUS-System | Modbus TCP | |||
| Remote maintenanceTCP/IP | yes | |||
| Engine | ||||
| Type | R6 | |||
| Engine displacement | 8,4 L | |||
| Engine Type | Naturally aspirated | |||
| Brennstoffeinsatz ² | 316 kW | |||
| RPM | 1800 min -1 | |||
| ISO standard power (mech.) ² | 120 kW | |||
| Engine cooling water heat quantity | 111 kW | |||
| Exhaust gas heat capacity 110 °C | 65 kW | |||
| Efficieny Thermal ² | 55,7% | |||
| Efficieny Combined (el. + th.) ² | 93,7% | |||
| Engine oil | semi-synthetic | |||
| Lubrication oil consumption | 60 g/Bh | |||
| Filling capacity lubricant (max.) | 20 + 150 L | |||
| Compressor | ||||
| Manufacturer | Atlas Copco | |||
| Heat recovery compressor | 103 kW | |||
| RPM, min¯¹ | 4150 | 3800 | 3500 | 2800 |
| Outlet pressure, barg ³ | 7 | 8 | 10 | 13 |
| Free air delivery (FAD), m³/min ³ | 22 | 19,5 | 17,8 | 14,2 |
| Modulation / power control | 60% - 100% | |||
| Compressed air connection | DN 80 PN 16 | |||
| Gas supply | ||||
| Gas train | Nach DIN | |||
| Interface Gas | DN 40 (1,5") | |||
| Gas flow pressure | 30 - 100 mbar | |||
| Air supply | ||||
| Combustion air mass flow | 405 kg/h | |||
| Air temperature | 25°C | |||
| Exhaust | ||||
| Interface Exhaust | DN 125 | |||
| TA-Luft | yes | |||
| Exhaust temperature | 640°C | |||
| Condensate mass flow | 46 kg/h | |||
| Max. permissible back pressure | < 15 mbar | |||
| Flow rate, dry | 349 Nm³/h | |||
| Mass flow, wet | 428 kg/h | |||
| Hydraulic integration | ||||
| Interface inlet/outlet | DN 50 (2") | |||
| Norm in-/outlet temperatur | 70 / 90°C | |||
| Standard flow rate | 11 m³/h | |||
| Heating water pressure | 2,5 bar (ü) | |||
| Dimensions / Weight | ||||
| Dimensions (LxWxH) | 2720x1100x2020 mm | |||
| Weight Module (w/o operating fluids) | 2800 kg | |||
| Dimensions housing (LxWxH) | 3000x1300x2100 mm | |||
| Weight housing | ca. 634 kg | |||
| Dimensions cabinet (LxWxH) | 800x300x1200 mm | |||
| Weight cabinet | 120 kg | |||
| Recommended concrete strength | C20/25 | |||
| Payload, qk | 3,5 kN/m² | |||
| Noise emissions (incl. standard silencer) | ||||
| Unit 1 m / 10 m | 75 / 65 dB(A) | |||
| Exhaust gas stack 10 m | 67 dB(A) | |||
| Exh. emissions with catalytic converter | ||||
| NOX | < 250 mg/Nm³ | |||
| CO | < 250 mg/Nm³ | |||
| HCHO | < 5 mg/Nm³ | |||
| Protection class | ||||
| Unit | IP 23 | |||
| Unit with housing | IP 53 | |||
| Control cabinet | IP 55 | |||
| Options | ||||
| Housing | yes | |||
| Additional silencer | yes | |||
| Emergency cooler | yes | |||
| Gas warning system | yes | |||
| Knock control | yes | |||
| Gross calorific value | yes | |||
| Additional lubrication oil tank | yes | |||
| LTE / UMTS-modul | yes | |||
| BUS-converter | yes | |||
| Heat meter (calibrated) | yes | |||
| Neutralisation plant | yes | |||
| Compressed air flow meter | yes | |||
| Containerised solution | yes | |||
| Remote control | yes | |||
| Catalyst technology for oil-free air | yes | |||
| Directly heated adsorption dryers | yes | |||
| Master Control readynes | yes | |||
| Contribution, installation, commisioning | yes |
¹ with a tolerance of ±7%; ² acc. to ISO 3046-1; ³ acc. to ISO 1217, Anh. D.
